|
Home Theater - Structured Wiring/Networks - Security
Audio/Video - Telecomm - Automation/Lighting Control |
Front Projection - Screens/Mounts - Speakers - Seating |
Screens - Mounts |
Screens
Fixed - Manual - Motorized - Rear
First, you have to pick out what type of screen you want...
A permanently tensioned front projection screen. Viewing surface is stretched flat over a frame which is mounted to or inset in a wall.
Motorized front projection screen. Operated by remote control or wall switch. Convenient.
Manual front projection screen, Crank operated or manual pull down. Less expensive, but limited selection.
A rear projection screen. Projector sits behind the screen. Provides best picture especially if there is allot of ambient light. More costly than front projection screens.
Permanently Tensioned Screens (Fixed)
 The surface of a permanently tensioned screen is a flexible, unsupported vinyl surface that is stretched flat yielding undistorted picture quality.
Viewing surface is flat and that means perfect picture quality.
Viewing surface is stretched tightly over a structural aluminum frame, which is concealed by an attractive black trim frame, for a clean, theatre-like appearance.
Switch instantly between two projection formats with the optional Eclipse Masking System.
Z-Clip wall mounting brackets included to simplify installation.
Standard black frame may be covered with velvety black Vel–Tex, which virtually eliminates all reflections on the frame.
Available surfaces: M1300, M2500, HiDef Grey, glass beaded, ATGrey, or AT1200.
 Clarion: Attractive mitered frame. Variety of finishes available.
Cineperm: Viewing surface conceals the front of the frame completely.
ShadowBox Clarion: Viewing surface is bordered in black vinyl with snaps. Frame is concealed by borders.
WrapAround Clarion: Surface wraps around frame, concealing it from view.
Onyx: Installs on the wall in about 15 minutes. Front or rear projection.
Attractive beveled 4" extruded aluminum frame is finished in black.
- Back to Top -
Manual Screens
Tab-Tensioned, Draper's Tab Tensioning System for vinyl surfaces: These screen surfaces consist of a reflective vinyl with no textile backing and are tensioned for sufficient flatness to perform properly. The surface is stretched flat, resulting in better picture quality.
Non-Tensioned, sometimes referred to as free hanging or conventional: The reflective surface is laminated to a woven textile base. The screen surface hangs suitably flat because of the stability of the material and the weight of the bottom dowel.
- Back to Top -
Motorized Screens
Now you'll need to decide if you want your home theatre screen to be...
Tab-tensioned: Draper's Tab Tensioning System for vinyl surfaces: These screen surfaces consist of a reflective vinyl with no textile backing and are tensioned for sufficient flatness to perform properly. The surface is stretched flat, resulting in better picture quality.
Non tensioned: Sometimes referred to as free hanging or conventional: The reflective surface is laminated to a woven textile base. The screen surface hangs suitably flat because of the stability of the material and the weight of the bottom dowel.
And now, decide if you want it to be wall/ceiling mounted or ceiling-recessed (hidden).
- Back to Top -
Rear Projection Screens
 Rear projection removes the projector from the viewing room and allows significantly brighter light in the home theatre.
Draper is the industry leader in the development of rigid rear projection screens and with CyberNet Solutions, we can provide a system to satisfy any requirement.
Cinescreen Rear Projection Screen:
A diffusion screen with a transparent substrate of glass or acrylic and with a permanently bonded optical coating.
DiamondScreen Rear Projection:
Particularly well suited for use with CRT or low light and low resolution output single lens projectors. Fresnel optics provide a very wide horizontal viewing cone.
IRUS Rear Projection Screen:
Superior resolution and uniformity with SXGA (1280 x 1024), UXGA (1600 x 1200) and higher projectors
Vortex Rear Projection Screen:
Combines Fresnel and diffusion technology for a brilliant, uniform projected image.
RPS/Complete: designed to provide perfect rear screen picture quality, while saving valuable floor space. Includes a framed rear screen attached to the structural uprights.
- Back to Top -
|
| |
